After 35 years running a hot glass workshop and glass gallery in Hay on Wye, we are now retiring an selling all our equipment. We will be adding more items over the coming weeks. Items listed with no price are open for offers. You are welcome to visit our workshop by appointment. Contact us at info@glassgallery.co.uk

Studio Glass Furnace
Furnace with a 50 kilo capacity Sillimanite pot. An efficient glass small gas fired glass furnace with recuperator suited to studio glass makers. Complete with Pete Howard combustion system. The Eurotherm 815P controller /programmer allows you to run different programmes.
The outside dimensions of the furnace are Height from floor 150cm Width 108cm Depth 109cm. The chimney which contains the recuperator is Height 180cm from floor, Width 31cm Depth 31cm.
The gathering port is 23cm x 23cm. The overflow hole is 19cm x 19cm. (see diagram in photos)
£3,500.00 ono. Contact us info@glassgallery.co.uk

Gloryhole
Gloryhole on robust steel frame with wheels. Pete Howard combustion system and rolling yoke with multi port burner and all controls and safety solenoids. Gets up to temperature quickly and temperature can be easily changed with one wheel at end of yoke.
Height from floor 135cm, width of Drum 61cm, length of Drum 64cm.
Ceramic fibre internal with cast doors. Internal width 39mm.
With both sets of doors open the internal ring hole diameter is 33cm. With first set of doors closed hole diameter is 22.5 cm , with second set of doors closed hole diameter is 11cm.
£2,000.00 ono. Contact us info@glassgallery.co.uk

Centrifugal Fans
Two fans for sale, used to provide air to furnace and glory holes. Fan 1 is presently in use, Fan 2 is a back up fan which had bearing and motor rewind in 2019 and has not been used since.
Both fans are 84cm in height from floor and 71cm across. The first 3 photos are of Fan1 and the last 3 are of Fan2
£350 each contact us info@glassgallery.co.uk

Annealing kilns
Originally ceramics kilns, we have two kilns for sale from our workshop.

Podmore & Sons Kiln
Three Phase kiln, including Stafford Instuments Temperature Programmer ST315B and associated Thermocouple and Relays/Contractors.
The outside dimensions of the kiln are Height 1400mm Width 830mm Depth 1070mm
The Inside dimensions of the kiln are Height 480mm Width 470mm Depth 620mm,

The kiln is heavy and will have to be collected from our workshop in Hay.
This kiln has now been sold.

Tru-fire kilns-Manufactured by D.J.WEBB.BEDNALL
Three Phase kiln, including Cambridge Process Controls 401 Plus Temperature Programmer and associated Thermocouple and Relays/Contractors.
The outside dimensions of the kiln are Height 1700mm Width 800mm Depth 990mm
The Inside dimensions of the kiln are Height 1000mm Width 560mm Depth 720mm,

The kiln is heavy and will have to be collected from our workshop in Hay.
£800.00 contact us info@glassgallery.co.uk

Iron warmer
Peter Howard iron warmer. Height 100cm Width including burner approx 50cm. Opening 18cm x 8cm. Comes with separate stand for holding irons. Please note in the photos there is a separate oven on top of the iron warmer which is not included.
£750.00 contact us info@glassgallery.co.uk

Glassma Leadfree Studio- 705A Pellets

Seven 25 kilo bags of the above pellets. £355.00 which is a 50% discount from current list price. Collection from workshop or delivery at cost. contact us info@glassgallery.co.uk

Small Glory Hole Burner with solenoid and electrical connections.

We used this glory hole burner with a small glory hole. Approx dimensions 300mm Dia 400mm length. If you pick up from the workshop you can also have the drum and ceramic fibre.

£300.00 contact us info@glassgallery.co.uk

Roof Units Extraction Fan

Plate mounted axial fan. Blade diameter 400mm, Housing plate 540 x 540mm, 230 volts, single phase supply, 1320 RPM, 0.31kw. We have two of these fans.

Fan 1 with speed controller £200, Fan 2 without speed Controller £150. contact us info@glassgallery.co.uk

Optic mould 16 Ribs

Internal width at top 60mm. Internal depth 80mm. Total width of mould 90mm. Total depth of mould 90mm.

£50.00 contact us info@glassgallery.co.uk

Optic mould 20 Ribs
Internal width at top 55mm, External width at top 80mm, Internal width at base 35mm, External width at base 60mm.Open bottom.
£50.00 contact us info@glassgallery.co.uk

Optic mould 30 Ribs
Used primarily for picking up cane, but you can do what you want with it.
Internal width 50mm, internal depth 100mm.External width 85mm. Small hole in bottom.
£50.00 contact us info@glassgallery.co.uk

Metal Canopies
Keep cool or cooler! With these two canopies in your studio. Sold together with approx. fifteen corrugated iron shields that hang from the canopies. When combined with extraction fans you will feel really feel the difference.
Canopy on the left side over the furnace measures 183cm x 183cm or 6ft x 6ft. The canopy on the right is 203cm in width and 185cm deep. This canopy also includes ceramic fibre board insulation.

£150.00 complete for both canopies and corrugated shields contact us info@glassgallery.co.uk

Glass Blowing Chair.
Solid wood and metal glass making chair.
£150.00 contact us info@glassgallery.co.uk

Glass yokes.
Two fully adjustable yokes. Collection only
£50.00 contact us info@glassgallery.co.uk

MobileGlass Marver
Solid glass marver.
Frame dimensions. Length 70 cm, Width 48cm, Height from floor 79cm.
Marver Dimension, Length 61cm, Width 46 cm, Thickness 3 cm.
Hairline crack on surface which does not affect marvering.
Collection Only.
£100.00 contact us info@glassgallery.co.uk